The New revised version of the MICC Limited MI Thermocouple welding machine incorporates a new weld torch assembly and a new vice jaw arrangement for easier changing of thermocouple sizes.
A comprehensive tool kit and extended manual is provided with all Welders. Key features include;
- Welds all Mineral Insulated thermocouples from 1.0mm to 6.0mm
- Fully automatic weld cycle under microprocessor control
- Both conductors and sheath closure weld carried out on one machine
- Removable Microscope included with optical light guide for maximum visibility
- Separate weld actions for conductors and sheath closure (CD & TIG)
- Automatic recharge on CD ready for next weld
- TIG weld has slope-up and slope-down functions for accurate weld control envelope
- Bench mounted
- Single phase supply
This machine is specifically designed for welding the hot junctions of mineral insulated thermocouples. Either Earthed (Bonded) Junction or Insulated Junction welds can be accommodated. The machine will weld thermocouples from1.0mm to 6.0 mm outside diameter. The welder is divided into two sections to accommodate the two welding processes associated with the junction of an MI thermocouple.
The machine is constructed from 16 gauge Mild Steel, Epoxy powder coated on all inner and outer surfaces. The panels that make up the main case are bolted together by M6 bolts into captive nuts. There are no welded sections or self-tapping screws. The side panels have punched holes to allow airflow through the machine, which is assisted by an internal fan. Internal components are mounted on mild steel substructures, which can be removed for maintenance and repair. Two handles are provided on the sides of the machine, however it is recommended that two people carry out any lifting or handling of the machine using approved lifting principles.
The machine operates from a single-phase 220-250v-ac-50Hz supply and is rated at 2000VA. For countries using 110V 60Hz please specify at time of order.
The machine requires a supply of High purity Argon Gas. Use of any other gases e.g. Argon/Nitrogen, Helium etc will alter the characteristics of the weld arc. Advice should be sought before using special gas mixes.
The maximum outside dimensions of the machine, including the microscope and weld table are:
The bench footprint is
MI Welding Machine Manual – /cms-files/MICC_Thermocouple_Welder_Instruction_Manual.pdf
Please see the below videos which demonstrate the process of welding MI Cable on this machine.